So a fast rotor, a middle rotor, and a slow rotor.

Rotor

Rotor

Rotor

The Brush wind turbine had a rotor 17 m (56 foot) in diameter and was mounted on an 18 m (60 foot) tower.

Civil Rotor

When this rotor does a full turn, it'll kick the next rotor one place.

So in this picture you see that rotor four is spinning faster and rotor two is spinning slower.

So in this picture, you see that rotor four is spinning faster and rotor two is spinning slower.

Eventually, the middle rotor does a full turn, and it will kick the left hand rotor one place.

Diameter

diameter

We lost the tail rotor! It's gone!

And then, the right hand rotor keeps going.

We have 26 starting positions for each rotor.

Radiotelescope diameter

This is the rough idea behind rotor encryption machines.

The Enigma is a kind of complicated rotor machine.

And if you manipulate the speed of this rotor, you are actually able to crack the rotor and eventually even have the centrifuge explode.

And the other way around, if you increase the speed of rotor three and decrease the speed of rotor one, then the robot pitches forward.

And the other way around, if you increase the speed of rotor three and decrease the speed of rotor one, then the robot pitches forward.

This destroyed the uniform distribution of the initial rotor position, and after repeated observations, it allowed the allies to reverse engineer the rotor wirings completely.

First, we choose from 1 of 6 possible rotor orderings.

Then we select an initial position from the rotor sequence.

And there's a rotor there that this motor is spinning.

We lost the tail rotor! It's gone! 64 is going down!

We check the plug diameter and enter it into the IPS Diameter to Cut field

It's actually half the diameter.

largest diameter is nine feet

A pressure drop occurs across both the stator and the rotor, with steam accelerating through the stator and decelerating through the rotor, with no net change in steam velocity across the stage but with a decrease in both pressure and temperature, reflecting the work performed in the driving of the rotor.

So let me draw a diameter.

So the diameter looks like that.

It's about 500 kilometers in diameter.

That's the 130 foot diameter library.

Understand that each rotor position is equivalent to a location in the sequence.

When the rotor advanced, an entirely new path was defined for each letter.

When boring OD gripping soft jaws cut the inside diameter of the jaws to the nominal work piece diameter

So we were able to associate the small digital warhead with the rotor control.

This diameter decreases rapidly within the placenta.

This diameter is one side of it.

The diameter forms part of that ray.

So let me draw a diameter here.

Let's draw a diameter just like that.

They share the diameter is right there.

What is the diameter of the circle?