So a fast rotor, a middle rotor, and a slow rotor.

Rotor

Rotor

Rotor

Civil Rotor

When this rotor does a full turn, it'll kick the next rotor one place.

So in this picture you see that rotor four is spinning faster and rotor two is spinning slower.

So in this picture, you see that rotor four is spinning faster and rotor two is spinning slower.

Eventually, the middle rotor does a full turn, and it will kick the left hand rotor one place.

We lost the tail rotor! It's gone!

And then, the right hand rotor keeps going.

We have 26 starting positions for each rotor.

This is the rough idea behind rotor encryption machines.

The Enigma is a kind of complicated rotor machine.

And if you manipulate the speed of this rotor, you are actually able to crack the rotor and eventually even have the centrifuge explode.

And the other way around, if you increase the speed of rotor three and decrease the speed of rotor one, then the robot pitches forward.

And the other way around, if you increase the speed of rotor three and decrease the speed of rotor one, then the robot pitches forward.

This destroyed the uniform distribution of the initial rotor position, and after repeated observations, it allowed the allies to reverse engineer the rotor wirings completely.

First, we choose from 1 of 6 possible rotor orderings.

Then we select an initial position from the rotor sequence.

And there's a rotor there that this motor is spinning.

We lost the tail rotor! It's gone! 64 is going down!

A pressure drop occurs across both the stator and the rotor, with steam accelerating through the stator and decelerating through the rotor, with no net change in steam velocity across the stage but with a decrease in both pressure and temperature, reflecting the work performed in the driving of the rotor.

Understand that each rotor position is equivalent to a location in the sequence.

When the rotor advanced, an entirely new path was defined for each letter.

So we were able to associate the small digital warhead with the rotor control.

Exploitation of gold bearing and tin bearing products

A second prototype with an improved rotor design was unveiled in March 2004 at Rosvertol.

We've been hit. Super 68, there is smoke coming from the top of your rotor.

Each rotor wheel had electrical contacts on either side with a maze of wirings within.

The rotor is that moving part within the centrifuge, that black object that you see.

But how were they telling each other their plug settings and their starting rotor numbers?

Now, the state of the art technology of the time was called a rotor encryption machine.

The throttle controls the power of the engine, which is connected to the rotor by a transmission.

(c) Who supplied the carbon fibre rotor tubes and how were technical specifications communicated to the manufacturer?

So at each rotor position, there's an electrical path from every input letter to every output letter.

Bearing what flag?

The Cobra shared the proven transmission, rotor system, and the T53 turboshaft engine of the UH 1 Huey .

It was an electromechanical rotor machine invented by a German engineer at the end of the World War I.

Here you have a picture of this machine. The, the motor, the, I guess the rotor is over here.

Bearing can be unbearable.

bearing a humbled look .

bearing a humbled look .

The structural support component, which is approximately 15 of the wind turbine cost, includes the tower and rotor yaw mechanism.

C 2, this is 68. We've been hit. Super 68, there is smoke coming from the top of your rotor.