We lost the tail rotor! It's gone!

We lost the tail rotor! It's gone! 64 is going down!

So a fast rotor, a middle rotor, and a slow rotor.

Rotor

Rotor

Rotor

Civil Rotor

When this rotor does a full turn, it'll kick the next rotor one place.

So in this picture you see that rotor four is spinning faster and rotor two is spinning slower.

So in this picture, you see that rotor four is spinning faster and rotor two is spinning slower.

Eventually, the middle rotor does a full turn, and it will kick the left hand rotor one place.

And then, the right hand rotor keeps going.

We have 26 starting positions for each rotor.

You can't do that with head tail tail.

he wagged his tail. He wagged his tail!

On this side remember, you're excited about head tail tail you're excited about head tail head.

This is the rough idea behind rotor encryption machines.

The Enigma is a kind of complicated rotor machine.

And if you manipulate the speed of this rotor, you are actually able to crack the rotor and eventually even have the centrifuge explode.

And the other way around, if you increase the speed of rotor three and decrease the speed of rotor one, then the robot pitches forward.

And the other way around, if you increase the speed of rotor three and decrease the speed of rotor one, then the robot pitches forward.

This destroyed the uniform distribution of the initial rotor position, and after repeated observations, it allowed the allies to reverse engineer the rotor wirings completely.

First, we choose from 1 of 6 possible rotor orderings.

Then we select an initial position from the rotor sequence.

And there's a rotor there that this motor is spinning.

A rat tail?

The tail end.

Watch that tail!

Here's one a head, followed by a tail, followed by a tail.

Who thinks that A is true that, on average, it'll take longer to see head tail head than head tail tail?

Who thinks that C is true that, on average, it'll take less time to see head tail head than head tail tail?

China s E Tail Revolution

Somebody pulled my tail.

Pig's tail? Too early.

Give me his tail.

Law's on my tail.

They measure from the head to the base of tail and the tail measures .

Then the pattern, head tail tail, that we've suddenly become fixated with happens here.

In fact, the average number of tosses till head tail head is 10 and the average number of tosses until head tail tail is eight.

A pressure drop occurs across both the stator and the rotor, with steam accelerating through the stator and decelerating through the rotor, with no net change in steam velocity across the stage but with a decrease in both pressure and temperature, reflecting the work performed in the driving of the rotor.

Understand that each rotor position is equivalent to a location in the sequence.

When the rotor advanced, an entirely new path was defined for each letter.

333 R400 tail fin assemblies

See that tail? That's incredible!

This time watch her tail.