Length times width times height.

So the perimeter is going to be this length plus this width plus that same length again plus that width over there.

Or the perimeter (P) is equal to the length (l) plus the width (w) plus the length (l) plus the width (w)

Length times the width times the height.

The length of its base is twice its width.

The length of its base is twice its width.

Which factors could represent the length times the width?

The length of its base is twice the width, right?

Everything has a width, and a height, and a length.

Well the area is just the width times the length.

To be equal to the ratio between the length of side BC

In aerodynamics, the aspect ratio of a wing is the ratio of its length to its breadth (chord).

The ratio between the length of side AB and length of side XY is going

Enter the string length as a percent of the image width here.

So this is the length of the base, this is the width.

The length of the mosque is 160 feet and width is 108 feet.

It has a width of x meters and a length of 2x meters.

The second candle is 5 centimeters higher, but the same length and width.

We live in a three dimensional world where everything has length, width, and height.

The rectangle shown below has a length of 20 meters and width of 10.

So the length of this side, maybe we call this the width, is 8xy squared.

Express the area of a rectangle with length 4y and width 2y as a monomial.

Equipment and dimension The ship is 333.3 meters in length and is 38 meters in width.

In the ratio between length and height, the Great Dane should be square.

The main island has a maximum length of 26 kilometres and a maximum width of 5 kilometres.

The main island has a maximum length of 26 kilometres and a maximum width of 5 kilometres.

Well, a square is just a special case where the length and the width are the same.

One way is to just add the width plus the length once, that's going to add up to half of the perimeter.

Enable this option if you want to preserve the aspect ratio of image. If enabled, the border width will be a percentage of the image size, else the border width will be in pixels.

When the length is considerably longer than the width and the thickness, the element is called a beam.

A gold bearing mineralized zone was discovered measuring approximately 3 kilometres in length and 10 metres in width.

I am assuming that they want the width in meters because that's what they're giving us the length in.

Scale an object over a point, by the ratio given by the length of a segment

An object scaled over a line, by the ratio given by the length of a segment

Scale an object over a point, by the ratio given by the length of two segments

An object scaled over a line, by the ratio given by the length of two segments

We're told that the glass portion of the window shown below that's the window has a height to width the ratio of 3 2.

Fit to Width

Fit to width

Scale to Width

And that would be equal to, you could say, it's just the width times the length times the height. dx times dy times dz.

Half Width and Full Width Forms

If built, its dimensions would be around 105 ft, 3 in (length), 24 ft, 8 in (height), 92 ft, 7 in (width with solar body) and 24 ft, 9 in (width at low body).

OK, so essentially you're saying the length times the width is going to be equal to the area, which is 4x to the fourth minus 9y squared.

The perimeter of a rectangular fence measures 0.72 kilometers. The length of the fenced area is 160 meters. What is its width?