Attach the three quarter inch Coolant Line from the Coolant Manifold to the standard Coolant Pump

Place the standard coolant pump next and connect the 3 4 coolant line from the coolant manifold to the pump

Coolant level indicator

Connect the electrical cord from the standard Coolant Pump to the receptacle labeled Coolant

To clear the coolant tank

Before attaching the Coolant Level Sensor to the Coolant Tank, check that it shows the correct

When the sodium potassium alloy is used as a coolant in nuclear reactors, is created which makes the coolant radioactive.

Once the Coolant Tank is full operate the Coolant System to check that none of the connections just made are leaking

Move to the coolant pump area and attach the wash down hose assembly to the mounting point on the coolant manifold

Install the Coolant Tank Handle onto the Tank

And I'm going to insert a coolant command

When the coolant tank is full, run each part of the coolant system to check that none of the connections are leaking

I wanted to turn coolant on, I had forgotten it

And there is the coolant command inserted into the program

When all coolant pump connections are complete ask the customer to fill the coolant tank so the connections that were just made can be tested for leaks

Maybe I forgot to turn coolant on before a particular tool

Before attaching the coolant level sensor to the coolant tank check that it registers the correct empty, 1 2 full, and full positions on the Current Commands page

When the decays, it causes a buildup of magnesium in the coolant.

leaving the machine clean with nothing remaining to contaminate the customer's coolant

lower end of the machine to maintain clearance to the coolant tank

A significant modification was also made to the entry for primary coolant pumps

Tilt along this axis influences how coolant and chips drain from the lathe

First, the machine is positioned at the correct height above the coolant tank

DEVICE

Device

Device

Device

device

Device

Device

Device

Device

First, the Machine is set to the correct height to clear the Coolant Tank

Now is a good time to install the Coolant Tank and its related components

Take out the coolant pump to access the middle leveling screw on this side

Unknown device

Camera device

Device Class

Input device

Display device

Output device

Link device

Device Summary

Device Manual

Read Device