Before attaching the Coolant Level Sensor to the Coolant Tank, check that it shows the correct

Before attaching the coolant level sensor to the coolant tank check that it registers the correct empty, 1 2 full, and full positions on the Current Commands page

Sensor

Sensor

Sensor left

Sensor right

Sensor bottom

Sensor top

Sensor Alarm

Sensor Resolution

Sensor Logger

Sensor Name

Remove Sensor

Edit Sensor...

Sensor Browser

Trilinear sensor

Provide a method for determining level of fuel in tank, gauging (the remaining quantity of fuel in the tank must be measured or evaluated).

Sensor Logger Settings

Drop Sensor Here

Remove the cover from the Level Sensor Cable Receptacle, engage the Connector and re install the Cover Cap

Remove the cover from the coolant level sensor jack, insert the connector, and re install the cover cap

Sensor exceeded critical limit

Color sequential area sensor

Color sequential linear sensor

Tank support! We must have tank support!

This is an empty space in a worksheet. Drag a sensor from the Sensor Browser and drop it here. A sensor display will appear that allows you to monitor the values of the sensor over time.

Install the Coolant Tank Handle onto the Tank

One chip color area sensor

Two chip color area sensor

Three chip color area sensor

This is actually sensor firings.

A tank!

Burning tank.

It's really just a pressure sensor

Each of these has a sensor.

Push this button to delete the sensor.

It has just that sensor in it.

How long did the sensor flash for?

(iv) Tank Projectiles

Tank full yet?

It's a tank!

This will verify the sensor connection is good

I will attach this sensor to Allie's ear.

The sensor is calibrated on humanlike thermic masses.

Example 1 insulated tank