Road grader scraper

Road grader scraper

It's a scraper bike it's called from Oakland.

We've got a conveyor there.

Use a plastic scraper to remove particularly thick applications of Cosmoline

Those are conveyor belts that go around.

like a centaur on a conveyor belt.

You can operate the chip conveyor in Setup mode but you must press and hold the conveyor key CHlP FWD

Connect the Electrical Cable to the receptacle labeled Conveyor

It's all conveyor belt, and it makes a book.

Ask someone to assist you to hold the weight of the Chip Conveyor while you unfasten the Shipping Security Screws and lower the Conveyor into position

A Plastic Scraper or Squeegee can be used to remove very thick applications of Cosmoline

ABC obtains a loan from Lender B to finance the purchase and installation of the conveyor equipment from Vendor C, secured by a security right in the conveyor equipment.

Change, to our mind, is like a conveyor belt endless and ever moving.

Route the Electrical Cable neatly from the Conveyor Motor down to the receptacle

Ah, ah! There it is. It's picked up the object off the conveyor.

With electricity supplied to the Conveyor press the CHlP FWD key to make sure the Conveyor Belt feeds smoothly with no binding or dragging inside the Enclosure and at the Chip Discharge Point

If a Chip Guide Bracket is included with the Conveyor Accessories, install it now

Move to the Belt Tensioning Bolts and tighten them inwards towards the Conveyor Motor

If people want to step off the conveyor belt, they are free to do so.

Connect both coolant pump power cables as well as the power cable for the chip conveyor

Once installed push the Conveyor back in towards the center of the Machine until it is fully seated

The phosphates are transported to the coast by an automated conveyor belt, the longest such belt in the world.

With the conveyor lowered install the Bracket Screws back into the holes they came from on the Enclosure Side Panel

This is one of the conveyor belts with the thing going by, but then you'll see the ones up above.

Note that any chip conveyor support screws or brackets should not be touching the ground until after the leveling procedure is complete

Start with the screws on the chip conveyor side followed by two of the four screws on the left side of the panel

Remove the four Screws connecting the Conveyor Shipping Brackets to the Machine Enclosure and carefully lower the section until it is set in the installed position

Under the purchase agreement with Vendor C, ABC is required to pay the purchase price for the conveyor equipment when it is installed in ABC's plant and rendered operational.

ABC also wishes to purchase certain drill presses (constituting equipment) from Vendor B and certain conveyor equipment from Vendor C. Finally, ABC wishes to lease certain computer equipment from Lessor A.

In March, Israel imposed new restrictions on the volume of goods passing through Karni crossing by reducing the height of goods placed on the conveyor belt at the security check from 1.7 metres to 70 centimetres.