You know we use PVC, and we sheath wires with PVC for insulation.

Connecting the 1 2 hose directly to the hose barb, with a hose clamp, is preferred

This is the faster hose, this is the slower hose.

It is recommended that the 1 2 hose is connected directly to the Hose Barb with a Hose Clamp

We have a faster hose, and then we have a slower hose.

PVC CPVC rigid plastic pipes similar to PVC drain pipes but with thicker walls to deal with municipal water pressure, introduced around 1970.

The teachers dragged giant PVC whiteboards into the classrooms.

I found a tractor fan, shock absorber, PVC pipes.

Somebody get the fire hose!

Was she wearing hose? No.

The faster hose takes 20 minutes.

Hey. Get out the fire hose.

We'll take the hose with us.

Come on and get that hose!

I'm gonna change the muffler hose.

PVC should be used only for cold water, or for venting.

Slower hose takes 30 minutes per pond.

I have an oxygen hose connected here.

We've created the green hose for lawns.

Get in. Yeah, I'll change that hose.

The spacing between the PVC and the preceding QRS wave is a lot shorter than usual and the time between the PVC and the proceeding QRS is a lot longer.

Wait, if we take a radiator hose and shove it down take a radiator hose and shove it down his throat.

So 10 minutes faster than the other hose.

We have the rate of the slower hose.

20 minutes per pond is the fast hose.

By attaching the Energy Shell 2 to your hose

How many pounds per minute for the faster hose?

How many pounds per minute for the slower hose?

You're not supposed to play with the fire hose!

For other people, it's a guy with a garden hose.

And let's say that the faster hose fills the pond.

Well, the faster hose does it in 10 minutes less.

So now we have the rate of the faster hose.

And then the slower hose, it takes 10 minutes more.

It's these hose. They're nylon and I'm allergic to nylon.

The plastics are made of PVC in addition to additives such as a plasticizer, often DEHP.

Principal types include Polyvinyl chloride (PVC) was produced experimentally in the 19th century but did not become practical to manufacture until 1926, when Waldo Semon of BF Goodrich Co. developed a method to plasticize PVC, making it easier to process.

Now how long is it going to take the slower hose?

So the slower hose is going to take 10 minutes more.

We've produced 40,000 meters of plastic hose this month not bad.

Here's a sample of our plastic hose, manufactured exclusively by PLASTAC.

A dual hose unit draws air to cool its condenser from outside instead of from inside the room, and thus is more effective than most single hose units.

You don't want you can imagine a hose if it bent a

He starts the hose at 10 PM let me write this down.

How long does each hose take to fill the pond by itself?