In the third step, the specimen is then placed in a bath of liquid polymer, such as silicone rubber, polyester or epoxy resin.

In the resin...

They are the major components of resin, and of turpentine produced from resin.

In polymer chemistry, a structural unit is a building block of a polymer chain.

It's a high strength polymer.

And that's a plastic polymer.

It's a gas injected polymer chair.

Hurry up with that resin. Get some more ammunition.

The lines around the edges are a polymer.

He also added resin to the then known list of electrics.

He also creates phantasmagoric sculptures made of bones from cast resin.

This thing was made of resin and it was too light.

Genetic engineering coupled with polymer physiotechnology coupled with xenotransplantation.

Amber, fossilized tree resin, is one of Latvia's most important cultural symbols.

So, I went down to my shop, and I molded it and I cast it in resin, because in the resin, then, I could absolutely get the glass smooth finished.

Another area I started thinking about involved creating new polymer materials.

The book itself is a polymer. It is not a tree.

This is an idea for a gas injected, one piece polymer chair.

This polymer is amazing because it's present in so many different organisms.

In pure water, the interactions between the resin and the hydrophobic regions of protein would be very weak, but this interaction is enhanced by applying a protein sample to HIC resin in high ionic strength buffer.

Non polymer materials can also be used as the matrix for carbon fibers.

and the gold of that land is good. There is aromatic resin and the onyx stone.

In the case of polymer nanocomposites we can use the properties of disordered systems.

There is a possibility of building ordered arrays of nanoparticles in the polymer matrix.

Climbing wall construction The most common construction method involves screwing resin hand holds on to wooden boards.

Carbon fiber reinforced polymer, carbon fiber reinforced plastic or carbon fiber reinforced thermoplastic (CFRP, CRP, CFRTP or often simply carbon fiber, or even carbon), is an extremely strong and light fiber reinforced polymer which contains carbon fibers.

It's a layered structure that's mineral and then polymer, and it makes it very, very tough.

Organic semiconductors (polymer, oligomer) developed thus far have carrier mobilities below 10 cm2 (V s), and usually much lower.

Here recent developments in the field of polymer nano composites and some of their applications have been reviewed.

The polymer melt is usually produced by heating from either resistance heating, circulating fluids, air heating or lasers.

This is an interesting copolymer variant in that one of the ingredients was a polymer to begin with.

Despite all these measures, we in Ireland have seen a gradual deterioration in the level of abuse, particularly of cannabis resin.

It was made out of resin, which wasn't a common material for movie props about the time the movie was made.

And what it entails is the use of resin, of this very thick resin with a veneer of the same kind of wood that's used throughout the hall, in a kind of seamless continuity that wraps the hall in light, like a belt of light rather than separating,

This relatively simple process uses only one amide solvent, and therefore spinning can be done directly after the polymer production.

The article is based on the book, Inventing Polymer Science Staudinger, Carothers, and the Emergence of Macromolecular Chemistry by Yasu Furukawa.

It goes with the flow of the polymer and you'll see there's an image coming up right now that shows the full thing.

As the acetone vaporizes and leaves the cells, it draws the liquid polymer in behind it, leaving a cell filled with liquid plastic.

The signal is produced by electrochemical and physical changes in the conducting polymer layer due to changes occurring at the surface of the sensor.

lots and lots of ultraviolet radiation and the melanin this wonderful, complex, ancient polymer compound in our skin served as a superb natural sunscreen.

Yahweh said to Moses, Take to yourself sweet spices, gum resin, and onycha, and galbanum sweet spices with pure frankincense there shall be an equal weight of each

And with so much polymer, what we really need is technical nutrition, and to use something as elegant as a tree imagine this design assignment

Acumen came in with the patient capital, and we also helped to identify the entrepreneur that we would all partner with here in Africa, and Exxon provided the initial resin.

In 1988, the United States Society of Plastics Industry (SPI) developed a coding system in which each kind of resin is labeled with a number, 1 7, to facilitate sorting.

Acumen came in with the patient capital, and we also helped to identify the entrepreneur that we would all partner with here in Africa, and Exxon provided the initial resin.