Reflux Condenser

One has a working fluid, water and ammonia, and the other is a condenser.

A reflux condenser subjects fluid to a process where a gas produced by heating is collected on the reflux condenser. The fluid is cooled until it condenses and runs back into the original fluid. Usually it is put on a round bottomed flask or several neck flasks.

They had the best microphone, a condenser type developed there in 1916 and greatly improved in 1922, and the best amplifiers and test equipment.

In 1853, Sir William Thomson (later Lord Kelvin) predicted as a resultof mathematical calculations the oscillatory nature of the electric discharge of a condenser circuit.

A dual hose unit draws air to cool its condenser from outside instead of from inside the room, and thus is more effective than most single hose units.

Radiant cooling may also be integrated with other energy efficient strategies such as night time flushing, indirect evaporative cooling, or ground source heat pumps as it requires a small difference in temperature between desired indoor air temperature and the cooled surface.

He added new linear motion guides to the pistons, he added a condenser to cool the steam outside the cylinder, he made the engine double acting so it had double the power.

He added new linear motion guides to the pistons, he added a condenser to cool the steam outside the cylinder, he made the engine double acting, so it had double the power.

The basic technique is to combine a high color rendering index (CRI) high intensity discharge lamp (HID lamp) and ballast with a condenser and collector Fresnel lens, an LCD removed from a common computer display and a triplet lens.

Without them, it would have been possible to buy 90,000 condenser units for locations retailing milk and meat, solving their refrigeration problems. In addition, 500,000 compressors could have been purchased to repair domestic refrigerators and thus respond to the public's needs in that area.

A rotary evaporator consists of a round flask in a bath of hot water, and is designed to evaporate solvents. The flask is rotated and the solvent collects under a vacuum onto a condenser and drips into a condensate collecting flask. In this way solutions can be concentrated or purified. By attaching a vacuum pump, the air pressure and therefore the boiling point of the fluid can be decreased.