The spindle sweep measurement will show that the spindle axis is perpendicular to the table surface

Boring is easy. Everybody can be boring.

Boring...

Place the work probe in the spindle

Attach the magnetic base to the spindle

Touch the spindle. Touch it, I say.

During automatic recovery, the spindle drawbar unclamps and you will hear a blast of air coming from the spindle nose

Along the bottom, we have the spindle information box with the override values for spindle speed, feed rate, and rapid rate

Boring blue

That's boring.

So boring.

Sound boring.

You're boring

How boring.

Most boring!

How boring.

The spindle usually moves in the z axis.

The spindle warm up should now be complete

Attach the magnetic base to the spindle nose

That is not boring. That is nothing if it's not boring.

I didn't know we were that boring. You are that boring.

Regardless of which tool ends up in the spindle

Remember, spindle speed also affects outside diameter holding force

The spindle will turn at a maximum of 750rpm

It's unbelievably boring.

It was boring.

Right? It's boring.

It's too boring.

You're really boring.

Boring. Like this!

OK that's boring!

This music's boring!

I'm boring you?

Remove any tool that's in the spindle using TOOL RELEASE

Remove the fasteners holding the spindle head bracket in place

Select program O02020 Spindle Warm up and press SELECT PROGRAM

Was he really boring?

Was I really boring?

Saying boring like that.

This is really boring!

It's a boring story.

Am I that boring?

Am I boring you?

Boring, but nice people.

I'm in boring company.